Multilac 3in1 Alkali Resistant Speed Primer is a water-based acrylic primer designed for both interior and exterior walls, as well as concrete and plaster surfaces. It is primarily used to seal or prime substrates such as porous stone, brick, and masonry. Acting as a foundation for subsequent coatings, it also serves as a barrier against alkalinity and efflorescence. This primer helps protect walls from the formation of white patches and colour deterioration, ensuring a long-lasting finish.
USAGE
- New Plastered Walls.
- Concrete and Cement Surfaces.
- Interior Walls and Ceilings.
- Exterior Walls.
- Masonry and Cementitious Surfaces.
- Coverage: 80-100sqft per ltr depending on the surface
1. Sure Surface Cleanliness:
- The surface must be dry, clean, and free of dust, grease, wax, mildew, and flaking materials.
- Remove old, loose paint using a wire brush, scraper, or sanding.
2. New Masonry / Concrete Surfaces:
- Allow fresh concrete, plaster, or cement surfaces to cure for at least 28 days before application.
- Remove efflorescence (white salt deposits) by brushing or washing and allow the surface to dry.
3. Previously Painted Surfaces:
- If the old paint is in good condition, clean and lightly sand it to improve adhesion.
- For flaking or chalky surfaces, remove all loose material and apply Multilac Stabilizer if required before the primer.
4. Moisture Check:
- Ensure the surface is completely dry before applying primer.
- Do not apply to damp or waterlogged surfaces.
5. Repair Work:
- Patch up cracks, holes, and imperfections with suitable filler or skim coat.
- Let the repair materials cure thoroughly before priming.
6. Surface Smoothness:
- Sand down rough or uneven patches and remove sanding dust with a clean, dry cloth or brush.
7. Application Conditions:
- Surface temperature should be between 10°C and 35°C.
- Avoid application under direct sunlight, heavy wind, or rain.
Reviews
There are no reviews yet.