Multibond Gap Filler

Features

• Easy to apply – One component formula with smooth application.
• Excellent adhesion – Bonds well to various surfaces without primer.
• Non corrosive – Safe for use on metals.
• Weather resistant – Freeze resistant and suitable for outdoor use.
• Paintable – Compatible with different paint types.

Where can this product be used?

• Between exterior window and door frames
• Masonry Walls
• Tiling / Skirting
• Timber & synthetic weatherboards
• Brickwork
• Concrete, Plaster
• Where shrinkage or movement has caused rigid fillers to crack
• Gaps with a maximum width of 25mm & depth of 12mm

What materials is this product suitable for?

• Timber
• Brick & Concrete
• Fiber cement sheeting, plasterboard
• Masonry
• Ceramic Tiles
• Aluminium & other metals
• Many other building surfaces

How to Use

1. Ensure the surface is clean, dry and free from dust, grease, flaking/powdery paint and old or crumbling caulk.
2. Cut seal and nozzle and fit to cartridge. Insert into a quality caulking gun such as  Light Speed caulking gun.
3. Apply with caulking gun, forcing product into gap.
4. Smooth with a wet spatula, ensuring sufficient product remains in joint.
5. Clean up excess uncured sealent with a water- soaked cloth immediately.
6. Fully cures in 1-2 weeks, depending on climate and joint depth.
7. Protect from water until firmly skinned. Allow for longer skin and cure times in damp conditions. protect from direct water contact for at least 5 hours after application.

Limitations:

• For new weatherboard, check weatherboard manufacturers instructions before using this product
• Note that in very harsh conditions, joints between boards may expand beyond products movement capability. In such cases re-apply product and paint over.
• Not suitable for areas of continuous water immersion ponds, aquariums,stoves, food preparation areas,marble or underwater applications.
• Not suitable for application at below 5°C
• Protect from rain until the product has firmly skinned, and allow longer skin and cure times in damp conditions.