Features
- Superior weather protection
- Long lasting flexibility
- No primer required before painting
- Water tight seal with a 10 year guarantee*
- Adhesion to wet or damp surfaces
- Non-bubbling
- Better curing and extrudability (>5°C) with no slump
- Paintable with water-based paints after product skins in 60 to 90 minutes
- Low VOC**
Where can this product be used?
- Sky lights
- Walls
- Patios
- Floors
- Fencing
- Windows
What materials is this product suitable for?
- Concrete
- Timber
- Metals
- Cement sheeting
- Brick
- Plasterboard
- Ceramic tiles
- Fiberglass
- Most plastics.
How to Use
- Ensure substrates are clean and free of oil, grease or loose particles.
- Cut seal and nozzle and fit to cartridge, then place in caulking gun.
- Hold caulking gun at 45° angle and gun sealant ahead of nozzle ensuring product is pushed into joint.
- For neat joints, use masking tape on both sides of the joint and remove before skinning.
- Tool with a soapy solution before skinning occurs. For optimal joint design, use non-absorbent backing material (e.g. polyethylene backer rod) and appropriate joint width/depth. See technical data sheet for more information.
Limitations:
- #Not suitable on polyethylene, polypropylene or Teflon.
- Cure excess product before disposal.
- Not for permanent water immersion or below water-line use. For water immersion please use Selleys Marine Flex
Reviews
There are no reviews yet.