Features
- Superior flexibility to cope with building movement, meaning the cracks and gaps will be hidden for longer.
- Has greater than 500% elongation/stretch and up to +/- 25% joint movement capability.
- Superior adhesion to a broad range of surfaces, resulting in a lasting finish.
- Has good resistance to weathering
- Contains a titanium compound for superior UV resistance.
- Contains a fungicide and algaecide to protect against unsightly mould and algae growth.
- Can be painted over with both water and oil based paints, after the surface has skinned. (Approximately 30 minutes after application)..
- Wide joints are best left for 48 hours before painting as some paints shrink during drying that can cause the paint to crack.
- Is formulated for long term resistance to cracking and crumbling.
- Is water based, so can be cleaned up with water.
- Will not stain building materials.
Where can this product be used?
- Between exterior window and door frames
- Fascia boards and eaves
- Masonry Walls
- Tiling
- Timber & synthetic weatherboards
- Brickwork
- Fences
- Where shrinkage or movement has caused rigid fillers to crack
- Gaps with a maximum width of 25mm & depth of 12mm
What materials is this product suitable for?
- Timber
- Brick & Concrete
- Fiber cement sheeting, plasterboard
- Masonry
- Ceramic Tiles
- Glass
- Aluminium & other metals
- Many other building surfaces
How to Use
- Ensure the surface is clean, dry and free from dust, grease, flaking/powdery paint and old or crumbling caulk.
- Cut seal and nozzle and fit to cartridge. Insert into a quality caulking gun such as Selleys Light Speed caulking gun.
- Apply with caulking gun, forcing product into gap.
- Smooth with a wet spatula, ensuring sufficient product remains in joint.
- Clean up with a damp cloth immediately.
- Allow to skin (about 30 minutes) before painting with water-based paints. If oil-based paints are to be used, or if gaps are large, allow sealant to set for about 24 hours and ensure the product is completely cured.
- Protect from water until firmly skinned. Allow for longer skin and cure times in damp conditions.
Limitations:
- For new weatherboard, check weatherboard manufacturers instructions before using this product
- Note that in very harsh conditions, joints between boards may expand beyond products movement capability. In such cases re-apply product and paint over.
- Not suitable for areas of continuous water immersion eg ponds
- Not suitable for application at below 5°C
- Protect from rain until the product has firmly skinned, and allow longer skin and cure times in damp conditions.
Reviews
There are no reviews yet.