NIPPON SKIM COAT PUTTY

This is a high quality wall putty and easy to use product. Water based Nippon skim coat ensures smooth finish to interior walls, concrete surfaces, bricks  works, and fiber cement boards, block works or  rendered surfaces.  

Include high-quality raw materials impart required  qualities such as higher whiteness level, good  trowelability, excellent binding properties & crack  resistance, low shrinkage finishing and supply higher  flexibility with smooth finish. 

APPLICATION 

SURFACE PREPARATION 

The surface must be clean and sound │free from loose  particles, dirt, grease, wax, oil etc. │ for loose plaster  and damaged areas remove the defective materials and  re-plaster the area │If the climate condition is too hot,  windy & too dried surfaces, dampen dry surface before  application to avoid bubble formation at the  application.  

APPLICATION PROCEDURE 

Add required amount of water to a bucket and mix with  SKIM COAT PUTTY (Usually around 5-8kg water for  20kg pack). │For best results slowly  add powder to water by mixing. │ keep the mixture rest  for 3-5 min prior application. │ Mix thoroughly using a  slow speed electric drill fitted with paddle for few  minutes until desired homogeneous paste is achieved. │  Mix only sufficient compound for 1 hour working time. 

Apply mixed SKIM COAT PUTTY with a hand trowel on clean and dust free surfaces. │As the surface coat  hardens, trowel up the surface with a light flat toweling  action, to achieve a dense smooth finish. │Nippon  skim coat putty can be applied in a layer ranging from 1  to 3 mm in thickness. │After the first application keep  it drying for 3-4 hours and apply second coat. │For the  hard drying keep it for 24 hours after the second coat  application. │To obtain the smooth surfaces, sanding  should be required with 120 grid sandpaper. │Once the putty has dried the final coats such as wall  primers and decorative paints can be applied. 

TECHNICAL DATA SHEET 

COVERAGE 

Generally, covers 10-15 sq.ft. per kg (200-300 sq.  ft. per 20kg pack). This will depend on the nature of  the wall and the thickness of the coat.