NIPPON CRACK FILLER is a fiberglass reinforced ready – to – use crack-filling compound for interior & exterior surfaces. Suitable foe cement plaster surfaces, gypsum board & dry- wall partitions.
PRECAUTIONS:
- Do not apply for cracks of more than 3mm thickness.
- Do not apply at a temperature below 5c 0r on wet surfaces.
- Do not add water.
DIRECTION FOR USE:
- Clean the surface. Ensure it is free from dirt or fungal growth.
- Create a V shaped groove on the surface to be filled.
- Apply a layer of Nippon Crack Filler exceeding 3cm from each side of the crack. Press the paste firmly into the crack with a spatula or putty knife and level with the surface. These must be applied consecutively, perpendicular layers to avoid leaving air pockets.
- Allow it to set for 12 hours before applying the second coat.
- Further finishing the POP or putty can be taken up once the coat is fully dry.
Reviews
There are no reviews yet.