A two-component (Epoxy-Polyamide) low temperature cured, protective coating on concrete and steel structure in a corrosive environment, it has excellent water resistance, flexibility, hardness, adhesion and has good resistance to aliphatic hydrocarbons, crude oil and alkaline.
Color: Black
Finish: Semi Gloss
Composition:Resin: Epoxy ester
Hardener: Polyamide.
Additive: Col Tar blend
Solvent: No Organic Solvent added
Surface Preparation: Surfaces must be sound, clean, suitably dry and free from anything that will interfere with the adhesion of the materials to be applied. Any oil or grease from site plant/ works must be removed with a detergent.
Application: Mix coaltar Resin (Clear) with Hardener(Black) in the ratio of two components resin to hardener 1 : 2 by weight and mix thoroughly till the mixture is homogeneous and apply by brush, roller or spray. Once mixed, Lankem Epilack Epoxy Coaltar has a pot life of 1-2 hours. If it hardens cannot be used thereafter. This product can be used as a protective coating for under water and application to prevent the corrosion of the metal structure. To give the long lasting protection, it is recommended to apply Lankem Epoxy Iron Oxide Primer as an under coat.
Limitation: Do not apply when air or substrate temperatures are likely to fall below 5 oC or when the relative humidity is above 80% during application or the drying period.


Reviews
There are no reviews yet.