Dulux AquaTech Fungicidal Wash

Benifits :-Ready for use. Kills fungus and algae growth on both interior and exterior surfaces, without affecting the adhesion and colour of subsequent paint coats.

Theoretical Coverage – A guide to the theoretical coverage which can be achieved under normal conditions is 10-20 m2 / litre of material, but his is very dependent on the absorbency of the surface.

Application:-

• Drying Times – 2-4 hours. Leave on the surface for 24 hours then rinse with clean water to remove dead growth/residues.
• Surface Preparation – Remove any mould, algae, lichen, moss by scraping and brushing. Dulux Fungicidal Wash will only be effective on surface growths. Where old growths have been trapped between coats during previous re-decoration, all existing coatings will need to be removed in order to treat the surface effectively.
• System Information – Mix thoroughly by shaking the container. Apply the solution by brush only to all affected areas. Leave for 24 hours and then thoroughly rinse and scrub with clean water to remove residues and dead growth. Repeat the process if necessary. On badly affected areas or where lichen is present the use of high-pressure water hosing may be necessary to remove all organic growth completely. Do not use Hypochlorite Wash before or after Dulux Fungicidal Wash as it oxidizes the active ingredient and makes it ineffective. If Hypochlorite Wash has been used, the surface must be thoroughly washed down with clean water before using Dulux Fungicidal Wash. Do not apply in wet weather.