Causeway KENLUX 24K BRIGHT GOLD

DESCRIPTION
Causeway Kenlux 24K Bright Gold is specially designed for all interior and exterior wood and metal applications where a bright gold finish is desired.

• Quick Dry
• Adds Sparkle
• 24 K Gold Finish

TYPICAL USES

• To decorate Gates, Railings, Statues, Pottery, gypsum board & ceiling sheets.
• Can be used on walls and well prepared wood and metal substrates.

METHOD OF APPLICATION

• Conventional Spray
• Brush

APPLICATION INSTRUCTIONS

• Surfaces must be clean, dry free from all defective or poorly adhering material, efflorescence, dirt, grease, wax etc. Where necessary surfaces should be thoroughly rubbed down using a suitable abrasive paper and then dusted off.
• After suitable preparation, the normal recommendation to prime the surface with suitable Causeway Primer, followed by Causeway 24K Bright gold.

COLOR : Gold
COMPONENTS : Single
FINISH : Sparkle

VOLUME OF SOLIDS : Approximately 25%
THINNER : Causeway NC Thinner (10% – only if required)

MIXING RATIO : Not required
SPRAY VISCOSITY : 18 – 20 sec (Ford 4)
RECOMMENDED THICKNESS PER COAT : 25µm
THEORETICAL COVERAGE : ~ 8m²/L (Based on 25µm DFT)
DRYING TIME : 01 hour (Touch dry) 16 hours (Hard dry)
RE-COATING INTERVAL : 08 hours